How Do I Replace The Filter On My SurfaceMaxx Foam Cannon (Model #SGY-PWA83A)?

Filter Replacement

Over time, the foam cannon filter can become clogged with built-up debris. Cleaning or replacing the filter will resolve this issue.

1. Remove locking pin(s) (Part 17) from cone assembly (Part 12). You can use a punch, pin, or needle to help remove the pin(s) if necessary.
2. Remove the U-type pin (Part 19). You may have to use a punch tool to remove the pin.
3. Parts 11, 13, 14, 15 will come out together once the U-type pin (Part 19) is removed.
4. Remove filter (Part 16) with flat head screwdriver.
5. Wash filter with soap and hot water. If filter is still dirty, replace.
6. Insert filter and reassemble cone assembly.