How to clean your foam cannon

AFTER EVERY USAGE PRIOR TO STORAGE, RINSE AND THOROUGHLY FLUSH WITH CLEAR WATER AS OUTLINED BELOW.

1. Remove the canister

2. Place the draw tube into a bucket of clean water.

3. Pull trigger on spray gun

3.Allow clean clear water to thoroughly flush out chemicals in filter for 45 TO 60 seconds         

FAILURE TO THOROUGHLY RINSE AND FLUSH THE CHEMICALS OUT OF THE FILTER WILL LEAD TO THE FILTER GETTING CLOGGED AND THE PRODUCT WILL FAIL TO OPERATE PROPERLY. THIS FAILURE CAN OCCUR AFTER THE FIRST USE.