My foam cannon stopped producing foam

Soap residue quickly accumulates in the components of the foam cannon nozzle if it is not thoroughly cleaned. The leftover soap dies out and prevents the nozzle from generating foam. Follow the instructions below to clean your foam cannon after each use.

AFTER EVERY USAGE PRIOR TO STORAGE, RINSE AND THOROUGHLY FLUSH WITH CLEAR WATER AS OUTLINED BELOW.

1. Remove the canister

2. Place the draw tube into a bucket of clean water.

3. Pull trigger on spray gun

3.Allow clean clear water to thoroughly flush out chemicals in filter for 45 TO 60 seconds

FAILURE TO THOROUGHLY RINSE AND FLUSH THE CHEMICALS OUT OF THE FILTER WILL LEAD TO THE FILTER GETTING CLOGGED AND THE PRODUCT WILL FAIL TO OPERATE PROPERLY. THIS FAILURE CAN OCCUR AFTER THE FIRST USE.